Daikin GQI-Eco Series, Руководство по обслуживанию, Страница: 129 / 215

ESIE15-13B Symptom-based Troubleshooting
Service Diagnosis 115
2.12 Swing Flap does not Operate
Applicable
Models
All models of SkyAir series
Method of Error
Detection
Visual check
Error Decision
Conditions
When ON/OFF of the micro-switch for positioning cannot be reversed even through the swing
flap motor for a specified amount of time (about 30 seconds).
Remark
Some functions can force the swing flap into a fixed position, although swing mode is selected
on the remote controller. This is not a unit error, but a control function to prevent draft to the
customer.
Before starting the troubleshooting, make sure the swing flap is not forced into such a fixed
position. (e.g. Hot start, defrost operation, thermostat OFF in heating operation or freeze
prevention in cooling operation. For details refer to "Swing Pattern Selection" on P.33.)
Supposed
Causes

Faulty swing motor
 Faulty micro-switch
 Faulty connector connection

Faulty indoor unit PCB