Daikin FTXTA30B2V1BB, Руководство по эксплуатации

Страница: 6 / 20

4 Before operation
Operation manual
6
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
a User interface
b Screws (field supply)
c User interface holder
1 Choose a place where the signals reach the unit.
2 Attach the holder with screws to the wall or a similar location.
3 Hang the user interface on the user interface holder.
4.3 To set the clock
Note: If the time is NOT set, , , and blink.
1 Press .
Result: and blink
2 Press or to set the current day of the week.
3 Press .
Result: blinks.
4 Press or to set the correct time.
Note: Holding down or increases or decreases the time
setting rapidly.
5 Press .
Result: Setting is complete. blinks.
4.4 To set the brightness of the indoor
unit display
1 Press for at least 2 seconds.
Result: The menu appears on the display. is blinking.
2 Press .
3 Press or to change the setting as follows:
…is blinking Brightness is…
High
Low
Off
4 To confirm the selected setting, press .
Result: The brightness setting is changed.
Note: The display automatically returns to the default screen after
60 seconds. To return to the default screen sooner, press
twice.
4.5 To turn on the power supply
1 Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the
reference position.
4.6 To change indoor unit position
setting
Set the indoor unit position to avoid direct airflow to walls.
1 Press for at least 2 seconds.
Result: The menu appears on the display.
2 Press or to change the menu to .
Result: The menu appears on the display. blinks.
3 Press to select the menu.
Result: blinks.
4 Press or to change the setting as follows:
If the unit is… Symbol Blinks Result
In the middle of the wall
(factory default setting)
≤500 mm from the wall
on right
≤500 mm from the wall
on left
Result: The airflow range will be adjusted to avoid direct contact
with the wall.