Daikin FTXTA30A2V1BW Скачать руководство пользователя страница 34

Страница: 34 / 56

Operation

User reference guide

FTXTA30A2V1BW

Split system air conditioner

4P518786-4F – 2020.05

5.12.2 To install the Daikin Online Controller application

Open:

▪

Google Play for appliances using Android.

▪

App Store for appliances using iOS.

Search for

Daikin Online Controller

Follow the directions on the screen to install.

5.12.3 To set the wireless connection

There are two options to connect the wireless adapter with your smart device.

▪

Connect the wireless adapter to your smart device directly.

▪

Connect the wireless adapter to your home network.

The wireless adapter will

communicate with your smart device in your home network using a modem,
router or a similar device.

For more information and FAQ refer to:

http://www.onlinecontroller.daikineurope.com/

Stop the operation before setting the wireless connection.

Use the user interface to choose the wireless adapter setting menu.

Menu

Description

—

WPS setting

AP mode

RUN mode (SSID + KEY)

Reset to factory default

Wireless adapter OFF

To connect the wireless adapter to your device directly

Hold

for at least 5 seconds in the default screen.

Result:

The confirmation display (menu ) appears.

Press repeatedly

until the AP mode display (menu ) appears.

Press

to confirm the selection.

Result:

is blinking. The operation and timer LEDs are blinking alternately.

Connect your smart device to the access point in the same way as to a
standard wireless network.

Enter the SSID number and password located on the unit or in the accessory
set.

Press

to exit the menu.

Result:

The display will return to the default screen.

Содержание FTXTA30A2V1BW
























































Результаты поиска

Содержание FTXTA30A2V1BW

Отзывы:

Бренды по названию

Популярные бренды

Daikin FTXTA30A2V1BW, Руководство пользователя

Результаты поиска

Содержание FTXTA30A2V1BW

Отзывы:

Бренды по названию

Популярные бренды