5
|
Operation
User reference guide
22
FTXTA30A2V1BW
Split system air conditioner
4P518786-4F – 2020.05
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
a
Flap range in cooling or drying operation
b
Flap range in heating or fan only operation
5.5.1 To adjust vertical airflow direction
1
Press
.
Result:
appears on the LCD. The flaps (horizontal blades) will begin to
swing.
2
To use fixed position, press
when the flaps reach the desired position.
Result:
disappears from the LCD. The flaps will stop moving.
5.5.2 To adjust horizontal airflow direction
1
Press
.
Result:
appears on the LCD. The louvers (vertical blades) will begin to
swing.
2
To use fixed position, press
when the louvers reach the desired position.
Result:
disappears from the LCD. The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
5.5.3 To use 3-D airflow direction
1
Press
and
.
Result:
and
appear on the LCD. The flaps (horizontal blades) and
louvers (vertical blades) will begin to swing.
2
To use fixed position, press
and
when the flaps and louvers reach
the desired position.
Result:
and
disappear from the LCD. The flaps and the louvers will
stop moving.
5.6 Comfort airflow and Intelligent eye operation
You can use Comfort and Intelligent eye operation separately, or combine them.
