background image

©2021

 

 

Our continuing commitment to quality products may mean a change in specifications without notice.

19001 Kermier Rd., Waller, TX 77484

www.daikincomfort.com

IOD-7133
01/2021

KEH067A41E, KEH063A4E(A), FTDBHMS, 

FTDBHML

INSTALLATION  IN                                                                                                     

STRUCTIONS

Safety Considerations

Read these 

Safety Considerations

 carefully before 

installing the drain pan heater. After completing the 

installation, check if the unit operates properly during the 

start-up operation.

Meaning of 

DANGER

WARNING

, and 

CAUTION

 symbols

Indicates an imminently hazardous 

situation which, if not avoided, will 

result in death or serious injury.

Indicates a potentially hazardous 

situation which, if not avoided, could 

result in death or serious injury.

Indicates a potentially hazardous 

situation which, if not avoided, may 

result in minor or moderate injury. 

It may also be used to alert against 

unsafe practices.

•  Inform users that they should store this installation 

manual for future reference.

•  After completing the installation, make sure that the 

unit operates properly during the startup operation.

• 

All phases of the field-installation, including, but not 

limited to, electrical, piping, and safety, must be done in 

accordance with manufacturer’s instructions and must 

comply with national, state, provincial, and local codes.

•  This product is a heater designed to melt snow that is 

blown into the product from the outside to prevent the 

drain pan of the outdoor unit from freezing.

•  Install the product with a snow-break hood on a high 

stand if this product is used in heavy snow areas.

Only personnel that have been trained to install, adjust, service 

or repair(hereinafter, “service”) the equipment specified in this 

manual should service the equipment.  The manufacturer will not 

be responsible for any injury or property damage arising from 

improper service or service procedures.  If you service this unit, 

you assume responsibility for any injury or property damage 

which may result.  In addition, in jurisdictions that require one or 

more licenses to service the equipment specified in this manual, 

only licensed personnel should service the equipment.   

Improper installation, adjustment, servicing or repair of the 

equipment specified in this manual, or attempting to install, 

adjust, service or repair the equipment specified in this manual 

without proper training may result in product damage, property 

damage, personal injury or death.

WARNING

DANGER

Do not touch the heater unit without wearing gloves.
The temperature of the heater unit will become high when the 

heater is turned on. Touching the heater unit with bare hands will 

result in burns or injury. 

WARNING

• 

Wear protective gloves at the time of installation.  

Touching the suction mouth or aluminum fin of the outdoor unit 

may result in injury.

• 

Do not install the product in places where there is danger of 

exposure to inflammable gas leakage.

 

If the gas leaks and builds up around the unit, it may catch fire.

• 

Do not grab the top plate of the outdoor unit carelessly when 

removing the top plate. 

The sharp edge of the top plate may cause injury.

• 

Do not install the outdoor unit in places where small animals 

may nest in the outdoor unit. 

If small animals intrude and touch the internal parts of the outdoor 

unit, the outdoor unit may malfunction, generate smoke, or ignite 

Advise the user to keep the place clean.

• 

Do not touch the heater unit with bare hands. 

The temperature of the heater unit will become high when the 

heater is turned on. 

Touching the heater unit with bare hands may result in burns or 

injury.

DANGER

DANGER

DANGER

Cancer and Reproduc

ve Harm

 -

www.P65Warnings.ca.gov

PROP 65 WARNING

FOR CALIFORNIA CONSUMERS

0140M00517-A

WARNING

INSTALLATION INSTRUCTIONS

Содержание FTDBHML













Отзывы: