manualshive.com logo in svg

Daikin FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU, Руководство по обслуживанию, Страница: 49 / 146

Поделиться
Скачать
Daikin FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU Скачать руководство пользователя страница 49

SiUS091628EA

Control Specification

Functions and Control

38

2.8

Outdoor Fan Control

1. Fan ON control to cool down the electrical box

The outdoor fan is turned ON when the electrical box temperature is high while the compressor is 
OFF.

2. Fan OFF control during defrosting

The outdoor fan is turned OFF during defrosting.

3. Fan OFF delay when stopped

The outdoor fan is turned OFF 60 ~ 70 seconds after the compressor stops.

4. Fan speed control for pressure difference upkeep

The rotation speed of the outdoor fan is controlled for keeping the pressure difference during 
cooling operation with low outdoor temperature.

Š

When the pressure difference is low, the rotation speed of the outdoor fan is reduced.

Š

When the pressure difference is high, the rotation speed of the outdoor fan is controlled as well 
as normal operation.

5. Fan speed control during forced cooling operation

The outdoor fan is controlled as well as normal operation during forced cooling operation.

6. Fan ON/OFF control when operation (cooling, heating, dry) starts/stops

The outdoor fan is turned ON when the operation starts. The outdoor fan is turned OFF when the 
operation stops.

2.9

Liquid Compression Protection Function

Outline

In order to increase the dependability of the compressor, the compressor is stopped according to 
the outdoor temperature.

Details

Operation stops depending on the outdoor temperature
Compressor turns off under the conditions that the system is in cooling operation and outdoor 
temperature is below 0°C (32°F).

Содержание FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU



















































































































































Отзывы:

Нет отзывов