Daikin FDMQ09RVJU, Руководство по обслуживанию

Страница: 81 / 146

SiUS071735EA Troubleshooting
Service Diagnosis 70
4.7 Thermistor or Related Abnormality
Error Code
C4, C5, C9
Method of Error
Detection The temperatures detected by the thermistors determine thermistor errors.
Error Decision
Conditions The thermistor is disconnected or shorted while the unit is running.
Supposed
Causes
„
Disconnection of connector
„
Defective thermistor(s)
„
Breaking of wires
„
Defective indoor unit PCB
Troubleshooting If the cause of the problem is related to the thermistors, the thermistors should be checked prior to
changing the indoor unit PCB.
To check the thermistors, proceed as follows:
C4 : Indoor heat exchanger thermistor 1 (liquid pipe) (R2T)
C5 : Indoor heat exchanger thermistor 2 (R3T)
C9 : Room temperature thermistor (R1T)
Note: When replacing the defective thermistor(s), replace the thermistors as ASSY.
Check No.01
Refer to P.100
Step Action
1 Disconnect the thermistor from the indoor unit PCB.
2 Read the temperature and the resistance value.
3
Check if the measured values correspond with the values in the table of thermistor
resistance check.
YES
(R24056)
NO
Check No. 01
Check the thermistor resistance
value.
YES
NO
Caution
Correct the connection.
Replace the defective
thermistor(s).
Replace the indoor unit PCB
(control PCB).
Normal?
Normal?
Check the connection of
connectors.
Be sure to turn off the power switch before connecting or disconnecting
connectors, or parts may be damaged.