Daikin EWWQ090G Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 58

Daikin EWWQ090G Скачать руководство пользователя страница 14

EWWQ090G ÷  EWWQ720L - R410a - Water-cooled scroll chillers
EWLQ090G   ÷ EWLQ720L   - R410a - Condenser less
EWHQ100G  ÷ EWHQ400G  - R410a - Heat pump scroll chillers

Water cooled scroll chillers & heat pump

Operation

Manual

Operation Manual

14

EWWQ - EWLQ - EWHQ

Water colled scroll chiller &heat pump
D-EOMWC01203-15EN

3 Using the Controller

The control system consists of a unit controller (UC) equipped with a set of extension modules that
implement additional features. All boards communicate via an internal peripheral bus with the UC.
The UC continuously manages the information received from the various pressure and
temperature probes installed on the unit. The UC incorporates a program that controls the unit.

Two different types of UC HMI are available:

1. Inbuilt HMI

This HMI is provided of three buttons and one wheel button.

Alarm status (from any page it links with the page with alarm list, alarm log and alarm
snapshot if available)

INFO

Back to Main Page

ESC

Back to the previous level (it can be the Main Page)

Wheel
Button

Used to scroll between the different menu pages, settings and data available on the HMI
for the active password level. Rotating the wheel allows to navigate between lines on a
screen (page) and to increase and decrease changeable values when editing. Pushing
the wheel acts as an Enter Button and will jump from a link to the next set of parameters.

2. External HMI (POL871.72)

This External HMI is provided of six buttons.

1

i

Back to Main Page

2



Alarm status (from any page it links with the page with alarm list, alarm log and
alarm snapshot if available)

3

Back to the previous level (it can be the Main Page)

4

▲

Go above

5

▼

Go below

1

2

1

3

1

4

5

6

«
...
12
13
14
15
16
...
»

Содержание EWWQ090G



























































Отзывы:

Нет отзывов