Daikin EWWQ-AJYNN, Руководство по обслуживанию

Страница: 91 / 130

ESIE07-05 Procedure for Software Upload/Download
Part 3 – Troubleshooting 3–5
3
3
4
5
1
1.3 Copy from pCO² to the Software Key
■ Switch off the pCO
2
and remove the "expansion memory" cover with a screwdriver (see Fig. 1)
■
Set the key selector on
■ Insert the key in the corresponding pin connector as shown. (see Fig. 2)
■ Press simultaneously the buttons UP an DOWN then supply the pCO
2
■ Check the LED on the key is on (green color )
■ Wait until the request of copying appears on the LCD display, then release the buttons and confirm
by pressing ENTER.
■ If the application includes a password to protect the software, use the UP and DOWN buttons on
the terminal to enter the correct password. Then press enter.
■ The data transfer operation takes about 50s using the 1MB key and 100s using the 2MB one.the
display will show a progressive series of numbers.
■ Once copied the application program starts, then switch off the pCO
2
, remove the key, put the
cover in its place and switch on the pCO
2
again,
■ Now the key has the program transferred by the pCO
2
.
Fig. 1 Fig. 2
ESIE07-05.book Page 5 Friday, December 21, 2007 3:21 PM