Daikin ETVZ16E9W7, Руководство пользователя

Страница: 30 / 64

5 | Operation
User reference guide
30
ET23E
Daikin Altherma 3 H HT F
4P644741-1A – 2022.03
2 Adjust the desired leaving water temperature.
+
–
35
°C
2
a b
Main zone
+
–
45
°C
3
a b
Additional zone
a Actual leaving water temperature
b Desired leaving water temperature
If scheduling is on after changing the desired leaving water temperature
▪ The temperature will stay the same as long as there is no scheduled action.
▪ The desired leaving water temperature will return to its scheduled value
whenever a scheduled action occurs.
You can avoid scheduled behaviour by (temporarily) turning off scheduling.
To turn off leaving water temperature scheduling
1 Go to one of the following:
▪ [2.1]: Main zone > Schedule
▪ [3.1]: Additional zone > Schedule
2 Select No .
To enable weather-dependent operation for the leaving water temperature
See "5.9.4 Using weather-dependent curves" [
4
46].
5.7 Domestic hot water control
5.7.1 About domestic hot water control
Depending on the DHW tank mode (installer setting), you use a different domestic
hot water control:
▪ Reheat only
▪ Sc reheat
▪ Schedule only