background image

5

 | 

Operation

User reference guide

27

ETSH/X(B)12P30+50EF
Daikin Altherma 3 H MT ECH₂O
4P663480-1A – 2022.07

Depending  on  the  system  layout  and  installer  configuration,  you  use  a  different
temperature control:

Room thermostat control

Leaving water temperature control

External room thermostat control

5.6.2 Setting the space operation mode

About space operation modes

Your unit can be a heating or a heating/cooling model:

If your unit is a heating model, it can heat up a space.

If  your  unit  is  a  heating/cooling  model,  it  can  both  heat  up  and  cool  down  a
space. You have to tell the system which operation mode to use.

To determine if a heating/cooling heat pump model is installed

1

Go to [4]: 

Space heating/cooling

.

2

Check if [4.1] 

Operation mode

 is listed and editable. If so, a

heating/cooling heat pump model is installed.

To tell the system which space operation to use, you can:

You can…

Location

Check which space operation mode is currently used. Home screen

Set the space operation mode permanently.

Main menu

Restrict automatic changeover according to a monthly
schedule.

To check which space operation mode is currently used

The space operation mode is displayed on the home screen:

When the unit is in heating mode, the   icon is shown.

When the unit is in cooling mode, the   icon is shown.

The status indicator shows if the unit is currently in operation:

When the unit is not in operation, the status indicator will show a blue pulsation
with an interval of approximately 5 seconds.

While the unit is in operation, the status indicator will light up blue constantly.

To set the space operation mode

1

Go to [4.1]: 

Space heating/cooling

 > 

Operation mode

2

Select one of the following options:

Heating

: Only heating mode

Cooling

: Only cooling mode

Automatic

:  The  operation  mode  changes  automatically

between  heating  and  cooling  based  on  the  outdoor
temperature.  Restricted  per  month  according  to  the

Operation mode schedule

 [4.2].

To restrict automatic changeover according to a schedule

Conditions: 

You set the space operation mode to 

Automatic

.

Содержание ETSH12P50EF





































































Отзывы: