Daikin ERAD 120E-SL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 76

D
–EIMAC00708-16EN - 15/76
Table 8
– ERAD 240E ÷ 460E-SL - HFC 134a - Technical Data
Units Size 240 300 350 410 460
Capacity (1) Cooling kW 243 295 352 409 462
Capacity control
Type --- Stepless
Minimum capacity % 25 25 25 25 25
Unit power input (1) Cooling kW 78.2 91.5 122.4 150.1 167.2
EER (1) --- 3.11 3.23 2.88 2.73 2.76
Casing
Colour --- Ivory White
Material --- Galvanized and painted steel sheet
Dimensions Unit
Height mm 2273 2273 2273 2273 2273
Width mm 1292 2236 2236 2236 2236
Length mm 3965 3070 3070 3070 3070
Weight
Unit kg 2036 2455 2662 2755 2789
Operating Weight kg 2081 2516 2726 2828 2886
Air heat exchanger Type ---
High efficiency fin and tube type
with integral subcooler
Fan
Type --- Direct propeller type
Drive --- DOL
Diameter mm 800 800 800 800 800
Nominal air flow l/s 16289 25117 25117 24433 24433
Model
Quantity No. 4 6 6 6 6
Speed rpm 715 715 715 715 715
Motor input kW 0.78 0.78 0.78 0.78 0.78
Compressor
Type ---
Semi-hermetic
single screw compressor
Oil charge (3) l 13 16 19 19 19
Quantity No. 1 1 1 1 1
Sound level
Sound Power Cooling dB(A) 91.7 91.7 92.0 92.0 92.7
Sound Pressure (2) Cooling dB(A) 72.6 72.5 72.8 72.8 73.5
Refrigerant circuit
Refrigerant type --- R-134a R-134a R-134a R-134a R-134a
Refrigerant charge (3) kg. 32 45 45 54 58
N. of circuits No. 1 1 1 1 1
Piping connections
Suction mm 76 76 139.7 139.7 139.7
Liquid mm 28 35 35 35 35
Safety devices High discharge pressure (pressure switch)
High discharge pressure (pressure transducer)
Low suction pressure (pressure transducer)
Compressor motor protection
High discharge temperature
Low oil pressure
Low pressure ratio
High oil filter pressure drop
Phase monitor
Notes (1)
Cooling capacity, unit power input in cooling and EER are based on the following conditions: SST 7°C;
ambient 35°C, unit at full load operation.
Notes (2) The values are according to ISO 3744 and are referred to: SST 7°C, ambient 35°C, full load operation.
Notes (3)
Refrigerant and oil charge is for the unit only; doesn't include external suction and liquid line. Units are
shipped without refrigerant and oil charge; holding charge nitrogen 1 bar