Daikin EMRQ8ABY1, Руководство по установке

Страница: 6 / 36

Installation manual
3
EMRQ8~16ABY1
Daikin Altherma outdoor unit
4P501819-1 – 2017.08
3.2. Combination and options
The EMRQ outdoor units can only be combined with EKHBRD
(1)
indoor units.
To install the outdoor unit, the following optional parts are also
required.
■
The refrigerant branching kit:
For the selection of the optimal branching kit, please refer to
"9.3. Selection of refrigerant branch kits" on page 12 .
To collect centrally the drain water from the bottom plate, following
option can be connected:
When there is a risk for freeze-up of this drain pan, the installer
should take enough measures to avoid ice accumulation.
3.3. Scope of the manual
This manual describes the procedures for handling, installing and
connecting EMRQ units. This manual has been prepared to ensure
adequate maintenance of the unit, and it will provide help if problems
occur.
3.4. Model identification
4. A
CCESSORIES
4.1. Accessories supplied with this unit
■
See location 1 in the figure below for reference to where
following accessories are supplied with the unit.
■
See location 2 in the figure above for reference to where
following accessories are supplied with the unit.
(1) EKHBRD connection is possible for EKHBRD_ABX and EKHBRD_AC.
Connection is NOT possible for EKHBRD_AA or EKHBRD_AB models.
For more details, see technical data book.
Description Model name
refnet header
KHRQ22M29H
KHRQ22M64H
refnet joint
KHRQ22M20T
KHRQ22M29T
KHRQ22M64T
Description Model name
Central drain pan kit KWC25C450
NOTE The installation of the EKHBRD indoor unit(s) is
described in the indoor unit installation manual.
EM RQ 8 AB Y1
3N~, 380-415 V, 50 Hz
Series
Identification of heating capacity (Hp)
Outdoor unit on R410A
European multi heat pump
Installation manual 1x
Additional refrigerant charge label 1x
Installation information sticker 1x
Fluorinated greenhouse gases label 1x
Multilingual fluorinated greenhouse gases label 1x
EMRQ
8 10 12 14 16
Liquid accessory pipe (1) 1x 1x 1x 1x 1x
Liquid accessory pipe (2) 1x 1x 1x 1x 1x
Suction gas accessory pipe (1)
1x — — — —
— 1x — — —
— — 1x 1x 1x
Suction gas accessory pipe (2)
1x — — — —
— 1x — — —
— — 1x 1x 1x
Discharge accessory pipe (1)
1x — — — —
— 1x 1x — —
— — — 1x 1x
Discharge accessory pipe (2)
1x — — — —
1x 1x — —
— — — 1x 1x
Accessory joint (angle of 90°) (1) 1x 1x 1x 1x 1x
Accessory joint (angle of 90°) (2) 1x 1x 1x 1x 1x
Accessory joint 1x — — — —
1
2
Ø22.2
Ø22.2
Ø28.6
Ø19.1
Ø22.2
Ø28.6
Ø15.9
Ø19.1
Ø19.1
Ø15.9
Ø19.1
Ø22.2
Ø25.4
Ø19.1
4PEN501819-1.book Page 3 Wednesday, September 13, 2017 12:52 PM