Daikin EKMBDXB7V1, Руководство по конструкции, Страница: 47 / 54

4P642495-1A – 2022.02 Page 46 of 52
5.3 Test Operation Procedure
Following test examples are explained by using
“Modbus poll ” version 6.0.2
5.3.1 Prepare register groups
1. Start-up
“Modbus poll ”
2. Setup the input registers or holding register groups by selecting following in the dropdown menu:
“ File ” > “ New Crtl+N”
& “ Setup ” > “ Read/Write Definition … F8”
Note: Each registers group can be separately saved by “File” > “Save as … “ (*.mbp)
Example how to define the input registers 30001 till 30008
Note:
In “Modbus poll” the register address is defined as follows: 30011 -> 10
For each register the “Alias” description can be set
For each register the “Format” should be set by right
clicking: “Format
> binary”