Daikin EHBH04CA, Руководство по установке

Страница: 13 / 28

4 Configuration
Installation manual
13
EHBH/X04~16CA
Daikin Altherma - Low Temperature Split
4P313771-1C – 2012.11
4.2 Basic configuration
4.2.1 Quick wizard: Language / time and date
# Code Description
[A.1] N/A Language
[1] N/A Time and date
4.2.2 Quick wizard: Standard
Backup heater configuration
# Code Description
[A.2.1.5] [5-0D] Backup heater type:
▪ 1 (1P,(1/1+2)): 6 kW 1~ 230 V (*9W)
▪ 3 (3P,(1/1+2)): 6 kW 3~ 230 V (*9W)
▪ 4 (3PN,(1/2)): 6 kW 3N~ 400 V (*9W)
▪ 5 (3PN,(1/1+2)): 9 kW 3N~ 400 V
(*9W)
Space heating/cooling settings
# Code Description
[A.2.1.7] [C-07] Unit temperature control:
▪ 0 (LWT control): Unit operation is
decided based on the leaving water
temperature.
▪ 1 (Ext RT control): Unit operation is
decided by the external thermostat.
▪ 2 (RT control): Unit operation is
decided based on the ambient
temperature of the user interface.
[A.2.1.B] N/A Only if there are 2 user interfaces:
User interface location:
▪ At unit
▪ In room
[A.2.1.8] [7-02] Number of water temperature zones:
▪ 0 (1 LWT zone): Main
▪ 1 (2 LWT zones): Main + additional
[A.2.1.9] [F-0D] Pump operation:
▪ 0 (Continuous): Continuous pump
operation, regardless of thermo ON or
OFF condition.
▪ 1 (Sample): When thermo OFF
condition occurs, the pump runs every
5 minutes and the water temperature
is checked. If the water temperature is
below target, unit operation can start.
▪ 2 (Request): Pump operation based
on request. Example: Using a room
thermostat and thermostat creates
thermo ON/OFF condition.
4.2.3 Quick wizard: Options
Domestic hot water settings
# Code Description
[A.2.2.1] [E-05] Domestic hot water tank:
▪ 0 (No): NOT installed
▪ 1 (Yes): Installed
# Code Description
[A.2.2.3] [E-07] Tank booster heater:
▪ 0 (Horizontal BSH): Installed at side of
the tank
▪ 1 (Backup heater): NOT installed
▪ 2: N/A
▪ 3: N/A
[A.2.2.A] [D-02] Domestic hot water pump:
▪ 0 (No): NOT installed
▪ 1 (Secondary rtrn): Installed for instant
hot water
▪ 2 (Disinf. shunt): Installed for
disinfection
See also illustrations below.
Domestic hot water pump installed for…
Instant hot water Disinfection
c
f
b
a
g
c
b
a
d f
e g
a Indoor unit
b Tank
c Domestic hot water pump
d Heater element
e Non
‑
return valve
f Shower
g Cold water
Thermostats
# Code Description
[A.2.2.4] [C-05] External room thermostat for the main
zone:
▪ 1 (Thermo ON/OFF): When the used
external room thermostat or
heat pump convector can only send a
thermo
ON/OFF condition. No
separation between heating or cooling
demand.
▪ 2 (C/H request): When the used
external room thermostat can send a
separate
heating/cooling thermo
ON/OFF condition.
[A.2.2.5] [C-06] External room thermostat for the
additional zone:
▪ 0: N/A
▪ 1 (Thermo ON/OFF): When the used
external room thermostat or
heat pump convector can only send a
thermo
ON/OFF condition. No
separation between heating or cooling
demand.
▪ 2 (C/H request): When the used
external room thermostat can send a
separate
heating/cooling thermo
ON/OFF condition.
[A.2.2.B] [C-08] External sensor:
▪ 0 (No): NOT installed.
▪ 1 (Outdoor sensor): Connected to
PCB measuring the outdoor
temperature.
▪ 2 (Room sensor): Connected to PCB
measuring the indoor temperature.