Daikin D-Series, Руководство по обслуживанию

Страница: 250 / 479

Si18-525B Instruction
Operation Manual 237
FVXS 35/50 B
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase your com-
fort.
„
To adjust the horizontal
blade (flap)
1. Press “SWING button”.
• “ ” is displayed on the LCD.
2. When the flaps have reached the
desired position, press “SWING
button” once more.
The display will go blank.
The flaps will stop moving.
„
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-side
blades.)
Notes on flap and louvers angle
• Unless [ SWING ] is selected, you should set the flap at
a near-horizontal angle in HEAT mode and at a upward
position in COOL or DRY mode to obtain the best
performance.
„
ATTENTION
• When adjusting the flap by hand, turn off the unit, and
use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the air
outlet, a fan is rotating at a high speed.
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN SWING
ON CANCEL
OFF
O N
1, 2
COOL/DRY
HEAT