5
|
Operation
User reference guide
21
FTXTP-M_FTXTP-N
Daikin room air conditioners
4P728152-3 – 2023.03
5.5.1 To adjust vertical airflow direction
1
Press
.
Result:
appears on the LCD. The flaps (horizontal blades) will begin to
swing.
2
To use fixed position, press
when the flaps reach the desired position.
Result:
disappears from the LCD. The flaps will stop moving.
5.5.2 To adjust horizontal airflow direction
1
Press
.
Result:
appears on the LCD. The louvers (vertical blades) will begin to
swing.
2
To use fixed position, press
when the louvers reach the desired position.
Result:
disappears from the LCD. The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
5.5.3 To use 3D airflow direction
1
Press
and
.
Result:
and
appear on the LCD. The flaps (horizontal blades) and
louvers (vertical blades) will begin to swing.
2
To use fixed position, press
and
when the flaps and louvers reach
the desired position.
Result:
and
disappear from the LCD. The flaps and the louvers will
stop moving.
5.6 Comfort airflow operation
This operation can be used in
heating
or
cooling
operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode
Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
