Daikin BRC1H519K7, Инструкция для установки и пользователя

Страница: 36 / 52

14 About the app
Installer and user reference guide
36
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
Installer mode settings Description
Installer mode Enable or disable installer mode.
Temporary / Indefinite Set the duration of installer
mode.
▪ Temporary: installer mode
active for 30 minutes. After 30
minutes, installer mode will
automatically
deactivate.
(default)
▪ Indefinite: installer mode active
until the next manual
deactivation.
Installer mode indicator Set whether installer mode
activation is indicated by the
installer mode indicator.
INFORMATION
Mind that installer mode is automatically enabled as soon
as you enter the installer mode menu.
14.4 Demo mode
14.4.1 About demo mode
To try out the app's operation and configuration functions in a safe
environment, it is possible to launch a demo version of the app.
14.4.2 To launch demo mode
Prerequisite: You are not in demo mode.
1 Go to the main menu.
2 Tap "Demo mode".
Result: You are in demo mode.
14.4.3 To exit demo mode
Prerequisite: You are in demo mode.
1 Go to the main menu.
2 Tap "Exit demo mode".
Result: You exited demo mode.
14.5 Functions
14.5.1 Overview: Functions
Category Control
Operation Turn ON/OF unit operation
Read out temperature sensor
information
Change the operation mode
Change the setpoint
Change the fan speed
Change the ventilation mode
Change the ventilation rate
Change the airflow direction
See notifications
Category Control
Configuration and advanced
operation Make controller and indoor unit
settings:
General
▪ Firmware update
▪ Notifications
Remote controller settings
▪ Master/slave status
▪ Screen
▪ Status indicator
▪ Date and time
▪ About
▪ Remove bonding information
Energy saving
▪ Presence detection
▪ OFF timer
▪ Energy consumption
▪ Power consumption limit
(a)
▪ Setpoint auto reset
>> to be continued