Databook Modular T - October 2022 - Rev. 00
22
Please refer to the Installation and Operation Manual (IOM) for further information.
4.12. Operating Limits
Modular T heat recovery units are designed for use in indoor environments, installed on the floor. The unit
cannot operate in environments containing explosive material and with a high concentration of dust. Thanks
to its modularity, each machine is able to adapt to different needs in terms of air flow and thermodynamic
treatments. The optimised choice of every detail, the search for maximum efficiency in each component, the
adoption of specific materials and constructive solutions transform environment friendliness and energy
savings into valid and advanced technological solutions.
4.12.1. Pro Version
Configuration
Size
Lower limit
temperature (°C)
Upper limit
temperature (°C)
Outside air temperature
without coil
All
-10°C
46°C
with pre heating coil
All
-25°C
46°C
Operating environment
temperature
All
All
-5°C
46°C
Temperature of
environment with the
machine off (e.g.,
storage, transport, etc.)
All
All
-40°C
60°C
Содержание ATB03RA
