Daikin Altherma R Hybrid Скачать руководство пользователя страница 27

Страница: 27 / 220

About the units and options

Installer reference guide

C08AF + EHYKOMB33A
Daikin Altherma R Hybrid
4P471761-1E – 2020.10

5.3 Combining units and options

INFORMATION

Certain options might not be available in your country.

5.3.1 Possible options for the indoor unit

User interface (EKRUCBL*)

The user interface and a possible additional user interface are available as an
option.

The additional user interface can be connected:

▪

To have both:

control close to the indoor unit,

room thermostat functionality in the principal space to be heated.

▪

To have an interface containing other languages.

Following user interfaces are available:

▪

EKRUCBL1 contains following languages: German, French, Dutch, Italian.

▪

EKRUCBL2 contains following languages: English, Swedish, Norwegian, Finnish.

▪

EKRUCBL3 contains following languages: English, Spanish, Greek, Portuguese.

▪

EKRUCBL4 contains following languages: English, Turkish, Polish, Romanian.

▪

EKRUCBL5 contains following languages: German, Czech, Slovenian, Slovakian.

▪

EKRUCBL6 contains following languages: English, Croatian, Hungarian, Estonian.

▪

EKRUCBL7 contains following languages: English, German, Russian, Danish.

Languages on the user interface can be uploaded by PC software or copied from an
user interface to the other.

For installation instructions, see

"7.10.8 To connect the user interface"

[

81].

Simplified user interface (EKRUCBS)

▪

The simplified user interface can only be used in combination with the main user
interface.

▪

The simplified user interface acts as room thermostat and needs to be installed
in the room that you want it to control.

For installation instructions, see the installation and operation manual of the
simplified user interface.

Room thermostat (EKRTWA, EKRTR1, RTRNETA)

You can connect an optional room thermostat to the indoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTR1 and RTRNETA). Thermostat
RTRNETA can only be used in heating-only systems.

For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.

Remote sensor for wireless thermostat (EKRTETS)

You can use the remote indoor temperature sensor (EKRTETS) only in combination
with the wireless thermostat (EKRTR1).

For installation instructions, see the installation manual of the room thermostat
and the addendum book for optional equipment.

Содержание Altherma R Hybrid




























































































































































































































Результаты поиска

Содержание Altherma R Hybrid

Отзывы:

Похожие инструкции для Altherma R Hybrid

Бренды по названию

Популярные бренды

Daikin Altherma R Hybrid, Руководство по установке для специалистов

Результаты поиска

Содержание Altherma R Hybrid

Отзывы:

Похожие инструкции для Altherma R Hybrid

Бренды по названию

Популярные бренды