Daikin Altherma 3 H F, Руководство по установке для специалистов

Страница: 144 / 216

10 | Configuration
Installer reference guide
144
EPGA11~16DAV3(7) + EA23DA6V(7)+9W
Daikin Altherma 3 H F
4P556075-1A – 2021.09
# Code Description
[9.8.3] [D-05] Allow pump :
▪ 0
No
: Pump is forced off
▪ 1 Yes : No limitation
Allowed heaters during preferential kWh rate power supply
Do NOT use 1 or 3.
[D‑00] Backup heater Compressor
0 Forced OFF Forced OFF
2 Allowed
Power consumption control
Power consumption control
See "6 Application guidelines" [
4
30] for detailed information about this
functionality.
# Code Description
[9.9.1] [4-08] Power consumption control :
▪ 0 No : Disabled.
▪ 1 Continuous : Enabled: You can set one
power limitation value (in A or kW) to which
the system power consumption will be
limited for all the time.
▪ 2
Inputs
: Enabled: You can set up to four
different power limitation values (in A or kW)
to which the system power consumption will
be limited when the corresponding digital
input asks.
[9.9.2] [4-09] Type :
▪ 0 Amp : The limitation values are set in A.
▪ 1 kW : The limitation values are set in kW.
Limit when [9.9.1]= Continuous and [9.9.2]= Amp :
# Code Description
[9.9.3] [5-05] Limit : Only applicable in case of full time
current limitation mode.
0 A~50 A
Limits when [9.9.1]= Inputs and [9.9.2]= Amp :
# Code Description
[9.9.4] [5-05] Limit 1 : 0 A~50 A
[9.9.5] [5-06]
Limit 2
: 0 A~50 A
[9.9.6] [5-07] Limit 3 : 0 A~50 A
[9.9.7] [5-08] Limit 4 : 0 A~50 A
Limit when [9.9.1]=
Continuous
and [9.9.2]=
kW
: