Daihen OTC Welbee Inverter W400, Руководство пользователя

Страница: 68 / 158

L
IST OF
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6-2
6.1.3 Internal function
Details of internal function ( 6.7
-
Setting Internal Functions)
The functions with circle mark (O) on the Memory row can be stored with the welding conditions.
No. Function Name Setting range Initial value Explanation Memory
F1
Standard/Extended
cable mode
OFF/ON OFF
Sets the waveform control mode for voltage
detection when using the welding power source in
the STANDARD mode.
OFF: STANDARD mode (standard mode)
ON: Extended cable mode (extended mode of
power cable)
-
F2 Switch of AC start 0.00 to 2.00 0.30
Sets the switching time to start AC welding in the
AC welding.
-
F3 Crater (no pulse) setting OFF/ON OFF
Sets the presence (ON/OFF) of the pulse in crater
treatment.
OFF: Crater (with pulse)
ON: Crater (no pulse)
-
F4 Auto/Semi-auto mode 0/1/2/3/4 0
Switches the I/O settings of the welding power
source:
0: Semi-automatic machine
1: Automatic machine 1
2: Automatic machine 2
3: Almega (OTC’s robots) specification
4: Almega (OTC’s robots) specification (for high
speed communication)
-
F5
Maximum external
command voltage
10.0/14.0/15.0 15.0 (V)
Sets the maximum value of voltage supplied when
current/voltage command is externally input.
-
F6 Up slope time 0.0 to 10.0 0.0 (s)
Sets the slope time from the initial condition to
the welding condition.
○
F7 Down slope time 0.0 to 10.0 0.0 (s)
Sets the slope time from the welding condition to
the crater condition.
○
F8 Welding result display time 0 to 60 20 (s)
Sets the display time for the current/voltage after
completion of welding.
-
F9 Analog remote control scale 200/350 350 (A)
Configures the settings of scale plate of the
analog remote control.
-
F10
Motor over current detection
level
20 to 150 70 (%)
Sets the over current warning level for the rated
current of the wire feed motor.
-
F11
Fine adjustment of welding
conditions memory
OFF/1 to 30 OFF
Allows fine tuning the current and voltage of
welding conditions stored on the memory using
the analog remote control.
OFF: No fine adjustment
1 to 30 (%): Fine adjustment is performed
(Maximum adjustment range at this time can be
set in percentage)
-
F12
Operation time of water-
cooled pump
20 to 60/ON 20 (min)
Sets the operation time of water-cooled pump
after welding ends.
Set the time in the range of 20 to 60 minutes or
set to ON (always ON ).
-
F13 No function OFF (fixed) OFF No functions are provided. -
F14
Start control time
adjustment
-50 to 50 0 (%)
Adjusts the control time of current at the time of
start.
-
F15
Start control current
adjustment
-100 to 100 0 (A) Adjusts the control of current at the time of start. -
F16
Slow-down speed
adjustment
-1.0 to 1.0
0.0 (m/
min)
Adjusts slowdown speed. ○
F17 Anti-stick time adjustment -50 to 50 0 (10ms)
Allows fine tuning meltage of the wire at the end
of welding based on the anti-stick process time.
○