REAR SEAT
COMPONENTS
REMOVAL
1. Remove the rear seat cushion by removing the two attaching bolts.
2. Separate the deck board carpet from the rear seat by disconnecting the velcro-tape sections.
3. Remove the rear seatback by removing the three attaching bolts.
4. Remove the rear seatback center hinge by removing the three attaching bolts.
INSTALLATION
1. Install the rear seatback center hinge with the attaching bolts and tightening them to the specified tight-
ening torque.
Tightening Torque:
5.5
±
1.5 N·m (0.56
±
0.15 kgf-m)
2. Install the rear seatback with the three attaching bolts and tighten the attaching bolts to the specified
tightening torque.
Tightening Torque:
19.5
±
4.5 N·m (2.0
±
0.46 kgf-m)
3. Install the rear seat cushion with the two attaching bolts and tightening them to the specified tightening
torque.
Tightening Torque:
19.5
±
4.5 N·m (2.0
±
0.46 kgf-m)
4. Fold the rear seat.
5. Ensure that the mechanism of the rear seat operates properly.
BO–39
5.5
±
1.5 (0.6
±
0.2)
19.5
±
4.5 (2.0
±
0.5)
19.5
±
4.5 (2.0
±
0.5)
19.5
±
4.5 (2.0
±
0.5)
JBO00098-00085
JBO00099-00000
JBO00100-00000
: Tightening torque
Unit : N·m (kgf-m)
