Daihatsu Mira, Руководство пользователя

Страница: 157 / 340

153
ページアップ日時 : 2012/02/24 11:31:28



4WD
0
0
1.5
2.5
3
4WD
0
0
1.5
2.5
3
4WD
0
3.5


When driving the car
Using the switch
Manual headlight
leveling switch
Vehicles equipped with halogen headlamps
You can use when the head lights are on.
Attitude of the vehicle will change by the
amount of load and the number of occupants,
when (the direction in which light of light) the
optical axis of the headlamp is facing up, can
be adjusted downward to the optical axis by
turning the dial. Is usually "0" (the optical axis
direction position of the top) is used in the dial.

Advice
 Advice
Standard car
Depending on the number of occupants, please
adjust dial according to the table below.
Passengers and luggage
compartment loading
situation
Dial position
2WD
With driver only
0
Front passenger & driver
0.5
4 people riding
1.5
Loaded cargo room & 4 people 2.5
Fully loaded cargo room
With driver only
3.5
Custom (vehicles equipped with halogen headlamps)
Vehicles equipped with discharge headlights
Since it is automatically adjusted, the
optical axis of the headlamp ring manual
headlamp switch should level has not been
installed.
Method of operation
When you rotate the dial, the optical axis of the
headlamp will change up and down. The
higher the number of you becomes a
downward dial is large.
Dial
Passengers and luggage
compartment loading
situation
Dial position
2WD
With driver only
0
Front passenger & driver 0
4 people riding
1.5
Fully loaded cargo & 4 people 2.5
Fully loaded cargo room
With driver only
3.5
Van car specifications
Dial position
2WD
With driver only
4
Fully loaded cargo room
Passengers and luggage
compartment loading
situation
With driver only
0
After unloading passengers or luggage,
please return dial to "0".
When the adjustment of the optical axis,
such as inspection, do so from the "0" to
dial.