Dahua VTO2101E-P, Быстрый старт

Страница: 17 / 39

12
Open the internet browser on the PC, then enter the default IP address of the door Step 2
station (VTO) in the address bar, and then press Enter.
Device initialization Figure 4-1
Enter and confirm the password, and then click Next . Step 3
The email setting interface is displayed.
Select the Email check box, and then enter your Email address. This Email address Step 4
can be used to reset the password, and it is recommended to finish this setting.
Click Next . The initialization succeeded. Step 5
Click OK . Step 6
Login interface Figure 4-2
4.3.2 Configuring Door Station (VTO) Number
The door station (VTO) number can be used to differentiate each door station (VTO), and it is
normally configured according to apartment or building number.
 You can change the number of a door station (VTO) when it is not working as SIP server.

The door station (VTO) number can contain 5 numbers at most, and it cannot be the same
as any room number.
Поставщик систем безопасности TELECAMERA.RU