Dahua VTO1220A, Руководство пользователя

Страница: 15 / 36

10
5.1.3 Issue Card
Before issuing card, please ensure the connection between VTH and VTO, and VTH is
added on WEB-end of VTO. The detailed steps to add VTH is in Ch 6.2.3.
Card issuing setup includes password and main card.
You can set right of issuing card in card issuing interface.
5.1.3.1 Issue Card via Password
Step 1.
In standby interface, press “ ” + “888888” + ” ”, to enter project setup
interface.
Step 2. Select and move by pressing 2 and 8.
Step 3.
Press “ ”.
Enter card issuing setup.
Step 4.
Select card issuing via password by press “number key 8”.
Step 5.
Input password “002236”. Press “ ” to confirm.
Step 6.
Input room no., press “ ” to confirm.
Step 7. Swipe the card you want to authorize.
Step 8.
When it prompts you that the process is successful, press “ ” to exit.
You swipe the card at card swiping area, and the system prompts the process is
successful.
5.1.3.2 Issue Card via Main card
Step 1.
In standby interface, press “
” + “888888” + “ ” to enter project setup interface.
Step 2. Select and move by pressing 2 and 8.
Step 3.
Press “ ”. Enter card issuing setup.
Step 4. Select card issuing via main card by
pressing “number key 8”.
Step 5. Swipe main card. To add main card, please refer to Ch 6.2.3.
Step 6.
Input room no., press “ ” to confirm.
Step 7. Swipe the card you want to authorize.
Step 8. When it prompts you that the process is successful, you can continue to