Dahua VTH2611L-WP, Руководство пользователя

Страница: 60 / 80

54
Arm and Disarm Function
3.9.1 Arm
In case of triggering alarm after arm, produce linkage alarm and upload alarm info.

Please ensure that the area has been added into arm mode. Otherwise, there will be no alarm
triggering after arm.

Please ensure that it is in disarmed status. Otherwise, arm will fail.
Tap on the home screen.
Arm mode
Select arm mode.
Enter arm and disarm password; tap OK .
The device beeps continuously, which represents successful arm. The key displays
corresponding arm mode.

Default password of arm and disarm is 123456. Please refer to 3.6.6.3 Password Setting
for details.

If delay alarm is set in the area, the device will beep continuously at the end of exit delay
time.
3.9.2 Disarm
Please make sure that it is in armed status. Otherwise, disarm will fail.
Tap disarm symbol at the lower right corner of the main interface.
Enter arm and disarm password, and then tap OK .