Dahua VTH2611L-WP, Руководство пользователя

Страница: 52 / 80

46
3.6.5 Forward Setting
Forward incoming calls.
Parameters at this interface are set on main VTH only, and extension VTH synchronizes with the main
VTH.
Tap Setting .
Select
Forward
.
Forward
Enter the VTH number in the corresponding forward mode, tap to enable the
forward function.
Table 3-7 Parameter description
Parameter Description
Always All incoming calls will be forwarded to preset number immediately.
Busy
When the user is busy, incoming call from the third party will be forwarded to preset
number. If No Answer is not set, when the user refuses to answer, the incoming call
will be deemed as busy forwarding.
No Answer
If no one answers after VTH ring time, the incoming call will be forwarded to preset
number.
Set VTH ring time at
Setting > Ring > Other
interface.

To forward to a user of another building or unit, the forward number is Bu Unit
+ VTH room number. For example, input 1#1#101 for 101 of Unit 1, Building 1.

To forward to a user of the same unit, the forward number is VTH room number.
Tap
OK
to save settings.