Dahua Unit VTO6221E-P страница 18 Скачать руководство пользователя

Страница: 18 / 43

Local Setting 9

Parameter

Description

areas on the target when shooting against light.

Wide dynamic

: the system dims bright areas and



compensates dark areas to ensure the clarity of all the

area.

Inhibition

: the system constrains bright areas and



reduces halo size to dim the overall brightness.

Sensor

Sensitivity

Adjust the value, and the larger the value is, the easier the

sensor will be triggered.

Video Standard Select from

PAL

NTSC

according to your display device.

Picture

Brightness

Changes the value to adjust the picture brightness. The

larger the value is, the brighter the picture will be, and the

smaller the darker. The picture might be hazy if the value is

configured too big.

Contrast

Changes the contrast of the picture. The larger the value is,

the more the contrast will be between bright and dark areas,

and the smaller the less. If the value is set too big, the dark

area would be too dark and bright area easier to get

overexposed. The picture might be hazy if the value is set too

small.

Hue

Makes the color deeper or lighter. The default value is made

by the light sensor, and it is recommended.

Saturation

Makes the color deeper or lighter. The larger the value is, the

deeper the color will be, and the lower the lighter. Saturation
value doesn’t change image brightness.

Gamma

Changes the picture brightness and improves the picture

dynamic range in a non-linear way. The larger the value is,

the brighter the picture will be, and the smaller the darker.

Video.GainAuto

Amplify the video signal to increase image brightness. If the

value is too big, there will be more noise in the image.

Mirror

Select

, and then the image is displayed with left and right

side reversed.

Flip

Select

, and then the image is displayed upside down.

Audio

Control

Select

Enable

Disabled

to turn on or off each sound.

Volume

Control

Mic Volume

Adjust the value, and the larger the value is, the louder the

microphone on the VTO will be.

Beep Volume

Adjust the value, and the larger the value is, the louder the

system sounds will be.

Access Control

4.3

This section introduces how to configure the lock, including unlock responding interval, open

door command, issue card password, duress password and lift control protocol.

Содержание Unit VTO6221E-P












































Результаты поиска

Содержание Unit VTO6221E-P

Отзывы:

Похожие инструкции для Unit VTO6221E-P

Бренды по названию

Популярные бренды

Dahua Unit VTO6221E-P, Руководство пользователя

Результаты поиска

Содержание Unit VTO6221E-P

Отзывы:

Похожие инструкции для Unit VTO6221E-P

Бренды по названию

Популярные бренды