Dahua N53AJ52, Быстрое руководство по установке

Страница: 25 / 28

14
Modifying the IP Address

Modify the IP address of one or multiple devices at one time. This section provides
instructions for modifying IP addresses in batch.

Modifying IP addresses in batch is available only when the corresponding devices have
the same login password.
Follow steps 1 through 4 in the section above to initialize the device and to search for
devices in your network segment. Ensure the username and password are the same as
set during the device initialization.
Select the devices whose IP addresses need to be modified, and then click Modify IP.
Select Static mode and enter start IP, subnet mask, and gateway.

IP addresses of multiple devices will be set to the same if you select Same IP.

If DHCP server is available in the network, devices will automatically obtain IP addresses
from DHCP server when you select DHCP.
Click OK.