Quick Start Guide
3
2 Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or on web interface. For
more information, see the
Web Operation Manual
.
●
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.
●
Plan usable network segment properly to connect the device to the network.
●
The following figures and interfaces are for reference only, and the actual product shall prevail.
2.1 Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
.
Step 3
Click
Search setting
.
Figure 2-1 Setting
Step 4
Select the searching way.
●
Current Segment Search (default)
Search the devices in the same network segment with ConfigTool.
●
Other Segment Search
Search the devices in the network segment which ConfigTool is not in.
●
If you select the
Current Segment Search
check box and the
Other Segment Search
check box together, the system searches devices under both conditions.
●
The username and the password are the ones used to log in when you want to modify
IP, configure the system, update the device, restart the device, and more.
Step 5
Click
OK
.
Step 6
Select one or several devices in uninitialized status, and then click
Initialize
.