Dahua MCVR6204 Скачать руководство пользователя страница 131

Страница: 131 / 239

Local Configurations

120

IMP/EXP

Figure 4-106

You can import and export the configuration files if needed.

Step 2



When exporting the configuring files, select a save path, and then click

Export

. A

file under the name of “Config_time” is created under the save path.



When importing the configuration files, select the file that you want to import, and

then click

Import

. The configuring files in the external storage device will be

imported to the Device. The Device reboots after the importing is succeeded.



If the backup operations are ongoing on the other interfaces, the

IMP/EXP

interface cannot be displayed.



Every time the IMP/EXP interface is displayed, it refreshes the devices and set

the address to be the root directory of the first external storage device.



Click

New Folder

to add new folder in the external storage device.

4.4.4.2 Backing Up Log Information

Preparation

Make sure the external storage device such as USB flash disk is connected to the Device.

Procedure

Select

Main Menu > INFO > LOG

Step 1

The

LOG

interface is displayed. See Figure 4-107.

Содержание MCVR6204
















































































































































































































































Результаты поиска

Содержание MCVR6204

Отзывы:

Dahua MCVR6204, Руководство пользователя, Страница: 131 / 239

Результаты поиска

Содержание MCVR6204

Отзывы: