manualshive.com logo in svg

Dahua ITC214-PH5B-F3-POE, Руководство пользователя, Страница: 4 / 59

Поделиться
Скачать
Dahua ITC214-PH5B-F3-POE Скачать руководство пользователя страница 4

III 

Important Safeguards and Warnings 

This section introduces content covering the proper handling of the Camera, hazard prevention, and 
prevention of property damage. Read carefully before using the Camera, and comply with the 
guidelines when using it. 

Transportation Requirements 

Transport the Camera under allowed humidity and temperature conditions. 

Storage Requirements 

Store the Camera under allowed humidity and temperature conditions. 

Installation Requirements 

●

Do not connect the power adapter to the Camera while the adapter is powered on.

●

Strictly comply with the local electrical safety code and standards. Make sure the ambient voltage
is stable and meets the power supply requirements of the Camera.

●

Do not connect the Camera to two or more kinds of power supplies, to avoid damage to the
Camera.

●

Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.

●

Do not place the Camera in a place exposed to sunlight or near heat sources.

●

Keep the Camera away from dampness, dust, and soot.

●

Put the Camera in a well-ventilated place, and do not block its ventilation.

●

Use an adapter or cabinet power supply provided by the manufacturer.

●

The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the Camera label.

●

the Camera is a class I electrical appliance. Make sure that the power supply of the Camera is
connected to a power socket with protective earthing.

●

An emergency disconnect device must be installed during installation and wiring at a readily
accessible location for emergency power cut-off.

●

Disconnect the Camera when installing and connecting the lens.

Operation Requirements 

●

Make sure that the power supply is correct before use.

●

Do not unplug the power cord on the side of the Camera while the adapter is powered on.

●

Operate the Camera within the rated range of power input and output.

●

Use the Camera under allowed humidity and temperature conditions.

Содержание ITC214-PH5B-F3-POE




























































Отзывы:

Нет отзывов