19
network, event, storage, system, and system information.
5.4.1 ITC
You can set the parking space detection mode of the Camera.
5.4.1.1 Configuring Parking Spaces
Set a parking zone and parking spaces inside the zone, so the Camera can detect whether the
specified parking space is occupied and recognize the vehicle.
Procedure
Step 1
Select
Setting
>
ITC
>
Park Space Config
>
Parking Space Management
.
Step 2
Select
Channel
at the upper-left corner to configure parking spaces for the corresponding
channel.
Only dual-sensor cameras support channel selection.
Step 3
At the lower-left corner of the page, set
Speed
and click
or
next to
PTZ Control
to
adjust the Camera view. Make sure the target parking spaces are inside the Camera field of
view and are easy to recognize.
Figure 5-12 Parking space management
Step 4
Set
Intelligence
.
1) Under
Intelligence
, select
Video Analyse Mode
.
●
Local
: Video recordings are analyzed by the Camera to get information such as
parking space number, status, plate number and vehicle model, and display on the
Live
page.
●
Remote
: The Camera only sends snapshots and video recordings to terminals such
as a platform for analysis.
2) Select
AI Attribute Settings
. The Camera obtains the corresponding attributes and
reports them to backend terminals such as a platform for analysis.