14
4.1.2 Remote Controller
You can set the parameters of the Device remotely through the remote controller. Install the
batteries before using the remote controller.
Figure 4-2 Remote controller
Table 4-2 Operation description
No.
Name
Description
1
Up/Down
Changes the number or parameter value when setting a
parameter.
2
Program
●
Go to the parameter setting interface.
●
Confirm the password setting.
3
Back
Returns to the previous menu or exits the menu setting
interface.
4.1.3 Device Operations
4.1.3.1 Function Description
Press
to select a function, and press
and
to enter the value as needed.
Table 4-3 Function Description
Function
Parameter
Description
Setting password
—
Log in to the Device with the default password
(0000) and change the password regularly.
Setting security level
H
The detection sensitivity of the whole
detector. It ranges from 1 to 20, and 12 by
default.
Setting sensitivity
L1-L6
The detection sensitivity of each zone. It
ranges from 1 to 200, and 185 by default.
