Dahua IPC-HFW5442HN-ZHE, Быстрый старт

Страница: 7 / 19

Quick Start Guide
1
1
Introduction
Device Ports 1.1

Device ports might vary with different models, and the actual product shall prevail.

Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit
and water damage. For the detailed operations, see the
FAQ Manual .
Device ports Figure 1-1
For more information about device ports, see Table 1-1.
Table 1-1 Device ports information
No. Port Name Description
1
G Ground connection of port I1, port I2 and port I3.
I1
Receives the switch signal of external alarm source. I2
I3
N1
Outputs alarm signal to alarm device.
N1/N2: Normally open alarm output port.

C1/C2: Common alarm output port.

There are two pairs of alarm out ports: N1 and C1, N2 and C2.
You should use them separately.
C1
N2
C2
/ Ports are not supported.
2
AUDIO OUT 3.5 mm port, line out.
AUDIO IN 3.5 mm port, line in.
3
LAN / OPT
LAN: Connects to network with network cable; provides

power to the device with PoE.
OPT: Connects to OPT devices to connect to the network.
