Quick Start Guide
6
Figure 2-3 Device initialization
Step 9
Select
Easy4ip
or select
Auto-check for updates
as needed. If neither, leave them
unselected.
Step 10 Click
OK
to initialize the device.
Click the success icon ( ) or the failure icon ( ) for the details.
Step 11 Click
Finish
.
2.2 Changing Device IP Address
●
You can change IP address of one or multiple cameras at one time. This section is based on
changing IP addresses in batches.
●
Changing IP addresses in batches is available only when the corresponding cameras have the
same login password.
Step 1
Follow Step1 to Step5 in "2.1 Initializing the Camera" to search for cameras on your
network segment.
After clicking
Search Setting
, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Step 2
Select the devices whose IP addresses need to be modified, and then click
Batch Modify
IP
.
