Dahua iDVR&iHCVR, Руководство пользователя

Страница: 60 / 262

Dahua iDVR&iHCVR
User’s Manual
51

Channel: Select the current camera channel.

PTZ type: There are two types: local/remote. Please select local mode if you are
connect RS485 cable to connect to the Speed dome (PTZ). Please select remote
mode if you are connecting to the network PTZ camera.

Control mode: You can select control mode from the dropdown list. There are two
options: Serial/HDCVI. For HDCVI series product, please select HDCVI. The control
signal is sent to the PTZ via the coaxial cable. For the serial mode, the control signal
is sent to the PTZ via the RS485 port.

Protocol: Select corresponding PTZ protocol such as PELCOD. For HDCVI series
product, please select HDCVI.

Address: Default address is 1.

Baud rate: Select corresponding baud rate. Default value is 9600.

Data bit: Select corresponding data bits. Default value is 8.

Stop bit: Select corresponding stop bits. Default value is 1.

Parity: There are three options: odd/even/none. Default setup is none.
Figure 4-14
If you are connecting to network PTZ, the PTZ type shall be remote. See Figure 4-15.
Figure 4-15