Dahua HWS800A, Руководство пользователя

Страница: 35 / 48

30
Parameter Function
Ethernet card
Set Ethernet card to config. Default is wired.
Currently it only supports wired.
Mode
You can select from static and DHCP mode. In DHCP mode, it automatically
search IP while you cannot set IP/subnet mask/gateway. Plus IP/subnet
mask/gateway display values from DHCP. In static mode, you shall manually set
IP/subnet mask/gateway. To switch from DHCP to static, you must set IP
parameters again.
MAC address Display host MAC address.
IP version Select IP version IPV4 or IPV6. These two IP addresses both can be accessed.
IP address Input new IP address to edit, and set subnet mask and default gateway.
Preferred DNS DNS server IP address.
Alternate DNS DNS server alternate IP address.
Connection
If you need to access the device via different protocols, please set connection port info.
Figure 4- 28
Parameter Note
Max
Connection
One device can enable up to this number of WEB logins, default is 10.
TCP Port TCP protocol COM provided port, default is 37777
UDP Port User data pack protocol port, default is 37778
HTTP Port HTTP COM port, default is 80
IP Filter
You may set trusted list and banned list to allow or prohibit user login.