Dahua HFD23 Скачать руководство пользователя

Страница: 109 / 190

Figure 4-94

Step 3 Click OK button.

4.3.8.2 HDD Info

It is to list HDD type, total space, free space, and status.

On the main menu, from Info->HDD, Enter HDD info interface. See Figure 4-95.
○ means current HDD/SD card is normal.. - means there is no HDD.

If disk is damaged, system shows as “?”. Please remove the broken hard disk before you add a

new one.

Once there is a hard disk confliction, please check hard disk time and system time is the same or

not. Please go to setting then general to modify system time. At last, reboot the system to solve

this problem.

After system booted up, if there is any confliction, system goes to HDD information interface

directly. Please note, system does not ask you to deal with it forcedly.

Содержание HFD23































































































































































































Результаты поиска

Содержание HFD23

Отзывы:

Похожие инструкции для HFD23

Бренды по названию

Популярные бренды

Dahua HFD23, Руководство пользователя

Результаты поиска

Содержание HFD23

Отзывы:

Похожие инструкции для HFD23

Бренды по названию

Популярные бренды