Dahua HD IR Network Dome Camera Quick Start Guide
5
Figure 2-3
Step 1
Please take out the installation position map from the accessories bag, and then stick it on the ceiling
or the wall. Dig bottom holes according to the installation position map, and then take out expansion
bolts from the accessories bag and insert them into the holes you just dug.
Step 2
Use the wrench to loosen the locking screws, pull the enclosure downward in order to separate it from
the pedestal and dismantle the device.
Note
The range of the lens adjusting angle: horizontal rotation direction ( 0
°～
+360°)
，
vertical rotation
direction ( 0°
～
+67
°
)
，
image rotation direction (0°
～
+360°).
Step 3
It is to select whether it is to run the wire through bottom or side, and lead multi-function cable into
cable exit hole on mounting surface.
Bottom wiring: select to lead out the cable through ceiling or wall, which can protect the cable
effectively.
Side wiring: select to lead out the cable through side exit and add metal conduit etc., which can
prevent the cable from being destroyed.
Please refer to Figure 2-4 and Figure 2-5 for more details about bottom wiring and side wiring
respectively.
