Dahua HDBW2831R-ZAS, Руководство по эксплуатации

Страница: 138 / 256

Operation Manual
125
5.1.1.1 Setting Period
Set arming periods. The system only performs corresponding linkage action in the configured
period.
Step 1
Click
Setting
next to
Period
.
Figure 5-2 Period
Step 2 Set arming periods. Alarms will be triggered in the time period in green on the timeline.
●
Method 1: Directly press and drag the left mouse button on the timeline.
●
Method 2: Enter an actual time period.
1. Click Setting next to a day.
2. Select a time period to be enabled.
3. Enter start time and end time of a time period.
◇
Select All or checkboxes of some days to set the time period of multiple days at
one time.
◇
You can set 6 time periods per day.
Step 3 Click Save .
5.1.1.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended time period according to the
Record Delay setting.
To use the record linkage function, set record plan for motion detection alarm and enable auto
recording in record control.