Dahua HAC-HDBW2401RP-Z, Руководство пользователя

Страница: 12 / 16

8
Step 3
Adjust the location of the dome pedestal according to the top cable outlet or side cable outlet.
Pull the cable out through the side outlet of installation surface and pedestal (please skip the
step if it is top cable outlet), aim the screw fixing holes of dome pedestal to the fixing holes of
expansion boles on the installation surface, then insert the self-tapping screws into the
expansion bolts and secure them firmly, fix the dome on the installation surface.
Step 4
Connect the video output port of the device cable to the back-end HCVR device and connect
the power port to power.
Step 5
Lens adjustment

If it is the motorized vari-focal camera, you can adjust the lens zoom and focus on the
back-end HCVR device to make image clear, and then adjust the lens angle according to
the direction shown in Figure 3-1. Tighten the screws to fix the lens after it is adjusted to a
proper angle.

If it is the manual vari-focal camera, you can use focus/zoom lever to adjust lens focal
length to make image and tighten the lever after it displays image on the back-end HCVR
device, then adjust the lens angle according to the direction shown in Figure 3-1. Tighten
the screws to fix the lens after it is adjusted to a proper angle.
Step 6
Install the dome enclosure; install the enclosure which is taken down in step 2 back to the
dome pedestal.
So far you have completed device installation and cable connection, you can check device
monitoring image via back-end coding device.