Web Basic Operations
19
Parameter Description
MTU
Enter the MTU (Maximum Transmission Unit) value of the NIC. The default value
is 1,500 bytes. The suggested value is 1,500 or 1,492.
1,500: The maximum and default value of the Ethernet packet. It is the
typical network connection setting without PPPoE and VPN. It is the default
setting of some routers, network adapters and switches.
1,492: Optimum value of PPPoE.
Modifying the MTU will lead to NIC restart and network interruption to affect
the running business. Be careful to perform it.
It is recommended to view the MTU value of the gateway first, and set the
MTU value of EVS device to be the same or slightly smaller than that of the
gateway, so as to reduce sub package and improve network transmission
efficiency.
Click
OK
to save the configuration.
3.4.2
Adding Remote Device
After adding the remote device, the device can receive, store and manage the video stream
transmitted by the remote device, so as to realize the distributed advantage of the network. You
can browse, replay, manage and store several remote devices.
The system supports adding remote devices in three ways: searching add, single add and
batch add.
Searching add: You can search for the remote devices in the same LAN and select the
ones you want to add. If you are not clear about the IP address of the device you need to
add, this method is recommended.
Single add: Add a few remote devices and you know the IP address, user name and
password of the device.
Batch add: When the first three sections of the remote device IP addresses are the same
(e.g. 192.168.1.1-192.168.1.255), and the user name and password of the devices are
also the same, this method is recommended to improve the speed of addition.
Template import: Import remote devices in batch through the template file.
Select
Direct
>
Camera
>
Remote
>
Device
.
The
Device
interface is displayed. See Figure 3-9.
