Dahua ESS2016X, Руководство пользователя

Страница: 61 / 116

ESS Series
User’s Manual
52
Figure 3-23
3.4.3.2
Remove RAID configuration
The remove operation consists of the following three situations. You can refer to Figure 3-22.

If current RAID is free (there is no storage pool, you can just click remove button to remove it
directly.

If current RAID has been used (there is a storage pool), but there is no share directory. Click
remove button, you can see system pops up a dialogue to warn you. You need to remove
storage pool and then remove the RAID group.

If current RAID has been used (there is a storage pool) and there is a share directory. Click
remove button, you can see system pops up a dialogue box to warn you. You need to delete
share directory and storage pool first, and then you can remove the RAID group.
3.4.3.3
Set special hotspare disk
Click , select set special hotspare disk, you can add or delete special hotspare disk. See
Figure 3-24.