Dahua DHI-VTO3211D-P4-S1, Руководство пользователя, Страница: 19 / 35

Local Setting 11
System
Configure parameters, and for the detailed description, see Table 4-4.
Table 4-4
System parameter description
Parameter Description
Date format
You can select from Year-Month-Day, Month-Day-Year, and
Day-Month-Year.
Time format
Configure the time format, and you can select from 12-Hour or
24-Hour .
System Time
Configure the VTO system date, time and time zone.
Do not change the system time arbitrarily; it might cause problems
on video searching and publishing snapshot or notice. Before
changing the system time, turn off video recording or auto snapshot.
Sync PC Click to sync the VTO system time and the PC system time.
DST Select ON to enable DST.
DST Type
Select Date to define a specific date for DST or select Week for it.
Begin Time
Configure the begin time and end time for DST.
End Time
NTP Enable
Select the check box to enable NTP timing.
NTP Server Enter the domain name of the NTP server.
Zone The time zone of the current area.
Port The port number of the NTP server.
Update Cycle
The time interval that the VTO syncs time with the NTP server, and it
is 30 min at most.
Auto
Maintenance Select the day and time for the auto maintenance, and the VTO will
reboot then.
SSH
Select the Enable check box, and then you can connect debugging
devices to the VTO through SSH protocol.
Click Save .
Security
On the main interface (Figure 3-1), select Local Setting > Security .
The Security interface is displayed. See Figure 4-5.