User’s Manual
6
5 Installation
Prior to installation, add the button to the hub and check the signal strength of the installation
location. We recommend installing the button in a place with a signal strength of at least 2
bars.
The button supports wall mount and can be handheld. This section uses wall mount as an
example.
You need to buy a bracket to install the button.
Figure 5-1 Installation
Step 1 Drill 2 holes in the wall according to the hole positions of the bracket.
Step 2 Put the expansion bolts into the holes.
Step 3 Align the screw holes on the bracket with the expansion bolts, and then secure the
bracket with screws.
Step 4 Fix the button to the bracket.
