Dahua DH-XVR4104C-X, Руководство пользователя

Страница: 107 / 327

Local Configurations 95
Parameter Description
Mirror
Enable the function, the left and right side of the video image will be
switched. It is disabled by default.
3D Denoise
This function specially applies to the image which frame rate is
configured as 2 at least. It reduces the noises by making use of the
information between two frames. The bigger the value is, the better
the effect.
Flip
In the Flip list, you can select 180° to change the video image display.
By default, the setting is No Flip .
Light
In the Light list, select Close or Enable to use the backlight
compensation or not.
Scene Mode
Configure the white balance to adjust the general hue of the image.
The default setting is Auto .
Auto: Automatically apply white balance to different colors to

make the image color display normally.
Sunny: Apply the threshold value to sunny environment.

Night: Apply the threshold value to night.

Customized: Manually adjust the Red Gain and Blue Gain values. 
Day & Night
Configure the color and black&white mode of the image. This setting
is not affected by the configuration files. The default setting is Auto .
Color: The camera outputs color image only. 
Auto: Depends on the camera, such as overall brightness and

whether there is an IR light, either color image or black&white
image is output.
B/W: The camera outputs Black and white image only.

By Time: The camera outputs image according to the configured 
sunrise time and sunset time.
Table 5-23
Click Apply to complete the settings. Step 3
5.5.2 Configuring Encode Settings
Select Main Menu > CAMERA > ENCODE > Encode . Step 1
The Encode interface is displayed. See Figure 5-64.