3
Parameter
Description
Link
Two link states:
Up
and
Down
.
Up
indicates the port is connected
successfully, and
Down
indicates the port is not connected or the
connection fails.
Flow Control
Displays the flow control state.
Speed/Duplex
Online: It displays the port rate and the duplex mode.
Offline: It displays
Down
.
VLAN
VLAN port. It is VLAN 1 by default.
PoE
Displays the power consumption of POE. Only 1–4 ports are PoE ports.
Non-PoE Ethernet switches do not support this function.
The number of PoE ports supported by different models is different.
Receive Usage
The current receiving speed is divided by the average speed in a certain
period (5 minutes usually).
Send Usage
The current sending speed is divided by the average speed in a certain
period (5 minutes usually).
Media Type
Two media types:
Copper
and
Fiber
.
Copper
indicates RJ-45 port, and
Fiber
indicates fiber port.
Local
2.2
You can set the system name, IP address, and subnet mask.
Click
Local
on the right of
Quick setting
interface.
Step 1
The
Local
interface is displayed.
Local
Figure 2-2
Enter the system name, IP address, and mask length.
Step 2
Click
OK
.
Step 3