54
Set the read&write username, authentication type, authentication password, encryption
Step 4
type and encryption password.
Click
Save
.
Step 5
3.2.8
DHCP Server
DHCP Server is the server for managing DHCP standard in the specific network. DHCP Server is to
allocate IP address for the workstation and make sure that the IP address for every workstation is
different. DHCP Server simplifies the network management task which should be done manually
before.
Generally, in the following scenes, DHCP Server is adopted to allocate IP address.
The network scale is large. The workload is too heavy if manually configured, and centralized
management for network will be difficult.
The quantity of PC is larger than the quantity of IP address in the network, and it is impossible to
allocate a static IP address for every PC. For example, the user quantity that can access network
at the same time is limited by ISP, and the user needs to acquire the IP address dynamically.
Only a small number of PC need the static IP address, and most of the PC do not need the static
IP address.
There are three parts of DHCP Server configuration:
VLAN Mode
,
Excluded IP
and
Pool
.
Select
Advanced > Seldom-used > DHCP > DHCP Server
.
Step 1
DHCP Server
Figure 3-65
Click
in
Global Mode
, to enable DHCP Server function.
Step 2
